banner


Make payments with PayPal
it's fast, free and secure!

 
MDrive-25A Sensorless Brushless DC Motor Controller

Description: MDrive-25A controller is designed to fill the gap between MDrive-18A and MDrive-36A. It features wide range of working voltages. It designed very compact in size and light weight. MDrive-25A offers the constant reliability. The circuit board adapts 2 ounces PCB and built in programmable temperature sensor. MDrive-25A is also fully PC programmable through our popular ESC-View software.

Using proprietary ESC-View PC software, the user can explore the full potential of this device. The features like programming the radio selectable multiple User Mode; Run Test PC tools for testing the best combination of parameters like a pro; Advanced Settings precise throttle control etc. For detailed product information, download the user manual.

Samples order only.

mdriver25
Quantity: 1piece per package
Price: $59.99
(without ESC-Link cable)
Price: $64.99
(with cable)
Prices in US Dollars
$6.00 for Shipping
Waived If the Order Is Over $100
MDrive-25A Sensorless Brushless DC Motor Controller Programmable Features
Battery Type
PC Programmable Through ESC-View Software For Any Type Batteries
Cutoff Type
PC Programmable Through ESC-View Software
Brake
1% Resolution PC Programmable Through ESC-View Software
Low Voltage Cut-off
0.1V Resolution PC Programmable Through ESC-View Software
Advanced Motor Timing
1 Degree Resolution PC Programmable Through ESC-View Software
Thermo Protection Cutoff
1 Celsius Resolution PC Programmable Through ESC-View Software
Acceleration Delay
PC Programmable Through ESC-View Software
Setup Transmitter Throttle the Start Point and the End Point
Read and Program Through ESC-View Software ( Must Perform the User Mode Selection Prior To Retrieve Data)
Reversible Turning
Change Any Two Motor Wires
Audible Indication
1200Hz Audible Tones
Radio Transmitter Programming
User Mode Selection Only--- The Simplest Way To Play!!!
Auto Shut Off When Signal Lost
Yes
MDrive-25A Sensorless Brushless DC Motor Controller Specifications
Maximum RPM
160,000 Electromagnetic
Cells with BEC
6-10 Ni cad or 2-3 Li-Poly
Cells without BEC
6-16 Ni cad or 2-5 Li-poly
Continuous
25 amps
Surge
30 amps
Switching Rate
8K and 16KHz PC Programmable Through ESC-View Software
BEC Max Current
2A Max @ 5V
Minimum Working Voltage
6V DC
Maximum Working Voltage
20V DC
Connection Wires
16 Gauge, 250 Threads, Silicon Rubber Insulation, 250Celius Temperature Rating
Size
52mm(L) x 26mm(W) x 8mm(T)
Weight
25 g with 5 Inches Wires Each Side.